Variocam valve sensor


I have a '94 968 coupe. The car only has 48k miles but the valve sensor in the VarioCam needs to be replaced. I dont know how much this should cost. I'm afraid that the local shop is charging me way to much, $1,800us installed. If you have time, write me back if you have any input on what I should do, or if there is a possible aftermarket alternative to my problem.
Thanks alot,



If it is the sensor that is connected to the flywheel which supplies the signal to the solenoid, then the price would be approximately £88 from Strasse, Leeds, UK. 0113 2340911. Fitting would be approximately an hours labour. From the difference in the pricing it may be that you mean the solenoid which would be significantly more and probably about the price you where quoted.

Would you like to have a Porsche related advert or link on this website
Please complete the contact form.
(No affiliation with, or approval of, Porsche AG, Porsche Cars GB or Porsche Club GB is intended or implied.)
There is no Intention to Infringe any Copyrights, Logos or Trademarks. All Copyrights, Logos and Trademarks remain the Property of the Rightful Owners.

Copyright © 2002-2021 All Rights Reserved. No part of this web site or related materials may be reproduced, stored in a retrieval system, transmitted, retransmitted, duplicated, copied, reposted or otherwise used in any form or by any means electronic, mechanical, photocopying, recording or otherwise without the express, prior, written approval of the owners of